We provide the pressure, you provide the points!

Models

1. B-MASTER-MINI

(one valve, one pressure, without its own safety valve, without pressure reduction)

This version does not have its own safety valve nor its own pressure reduction. Therefore the input pressure must already be set to the filling pressure desired (200 or 300 bar) and the input line must be correspondingly secured.
The filling pressure in the pressure container is displayed as bar/psi on a pressure gauge.

2. B-MASTER-MIDI

(two valves, one pressure, without its own safety valve, without pressure reduction)

This version does not have its own safety valve nor its own pressure reduction. Therefore the input pressure must already be set to the filling pressure desired (200 or 300 bar) and the input line must be correspondingly secured.
The filling pressure in the pressure container is displayed as bar/psi on a pressure gauge.
Both filling valves can be filled simultaneously with the same end pressure.

3. B-MASTER-MAXI

(one valve, pressure reducer, safety valve)

Thanks to its own pressure reducer and the safety valve the filling panel can be attached directly to a storage cylinder with max. 420 bar storage pressure.

In connection with additional MIDI or MINI filling panels the MAXI filling panel is ideally suited for setting up a filling line with alternative filling pressure (e.g. additional MIDI filling panels with 300 and 200 bar). See installation example

Installation example

1. BAUER compressor with standard delivery package
2. Storage system with equipment acc. to BAUER standards
3. B-MASTER MAXI filling panel
4. B-MASTER MINI or MIDI filling panel
5. Air systems / markers