Accessories for Processing Systems

Processing - Drying & Purifiying For the I Series Compressors

Air processing is essential for trouble-free operation of a high pressure compressed air system. The primary objective of processing compressed air is to remove or reduce water and oil to a permissible level. BAUER is an international leader in the field of high pressure air processing systems. We manufacture high pressure non-regenerative and heatless regenerative dryers for our I Series compressors (1000 - 6000 PSIG).
BAUER’s air processing systems are easy to use, inexpensive to operate and have a reputation for reliable service.
The IP and SECCANT dryers offer atmospheric dewpoints to -94°F. Both types of dryers use replaceable cartridges.
Contact BAUER for your high pressure air processing requirements.

* Air processing capacity in standard cubic feet per minute and referenced to 4350 PSIG and 70ºF inlet temperature to the purification system.

IP Processing Systems

SECCANT Dryer shown with optional purification

SECURUS® - The Patented Moisture Monitoring System

AIR-KOOL - The Refrigerated Air Cooler

IP Processing Systems

The BAUER IP non-regenerative processing systems are the ideal solution for economical processing of high pressure compressed air. The IP Systems do not require electrical power for operation and there are no system losses for regeneration. The IP Systems are designed for working pressures from 2000 - 6000 PSIG and flow rates to 125 SCFM.

SECCANT Regenerative Dryers

BAUER SECCANT heatless regenerative dryers are the ideal solution for cost effective drying of high pressure compressed air for continuous applications. These dryers require a partial stream of the dried air (5% maximum) for regeneration. The SECCANT dryers are standard with an on-board controller which requires 115V electrical power for operation and connection to the compressor’s control circuit for cycle control. The SECCANT dryers are designed for working pressures from 2000 - 6000 PSIG and flow rate to 125 SCFM.

SECURUS® - The Patented Moisture Monitoring System

SECURUS® ensures 100% utilization of the air processing cartridges because the moisture sensor is embedded directly in the molecular sieve. The SECURUS cartridge, with its moisture sensor, is the last cartridge in the air processing system. SECURUS requires 115V electrical power for operation and connection to the compressor’s control panel or to the SECCANT controller for automatic warning and shutdown when the SECURUS cartridge becomes saturated. The SECURUS status display can be locally mounted to the SECURUS cartridge chamber or to the compressor’s instrument panel. SECURUS is available for working pressures from 2000 - 6000 PSIG and flow rates to 125 SCFM. SECURUS is suitable for outdoor use.

® U.S. Patent Number 4,828,589

AIR-KOOL - The Refrigerated Air Cooler

AIR-KOOL is the ideal solution for reducing the operating costs of your compressor and air processing system. AIR-KOOL is a refrigerated, counterflow heat exchanger that further cools the compressed air from the compressor’s air cooled aftercooler to 36°F - 46°F. This additional cooling causes more water and oil to condense out of the compressed air for removal by the final separator. AIR-KOOL increases the efficiency of the final separator and extends the life of the processing cartridge(s) up to six times.

AIR-KOOL is designed for working pressures to 7000 PSIG and flow rates to 21 SCFM.

AIR-KOOL is available as an option on new BAUER units or as an aftermarket addition to existing BAUER units. AIR-KOOL requires 115V electrical power for operation and is for indoor use only.

1. Condenser
2. Collecting Tank
3. Cooling Compressor
4. Temperature Indicator
5. Counterflow Heat Exchanger

Dimensions: 26" x 15" x 14" (660 mm x 380 mm x 360 mm)
Weight: 105 lbs. (46 kg)