4 and 5-Stage High Pressure Breathing Air Compressors

Open Designs

BPII-10-E3 – Electric Motor Drive

Pressure
up to 6000 psig
up to 414 bar

Charging Rate
35.9 to 145 scfm
1017 to 4106 l/min

Power
30 to 100 hp
22 to 75 kW

Open packages in horizontal or vertical configurations combine compressor and air purification system in a space saving design.
These compressors set the standard for larger capacity air requirements.

STANDARD SCOPE OF SUPPLY

BAUER breathing air purification system

BAUER PLC based controller with four line text display

NEMA 4 rated electrical enclosure with UL® listed control panel

Compressor low oil pressure and high temperature safety shutdowns

Emergency stop push button

Automatic condensate drain system with non-corrosive condensate reservoir and integrated float switch.

Automatic “Full” indication and compressor shutdown

Beltguard designed to meet OSHA guidelines

Soft start, isolation contactor, and circuit breaker providing instantaneous short circuit protection

AVAILABLE ACCESSORIES (factory installed)

Purification upgrade

CO monitor

SECURUS (K42V-E3 and K42-E3 only)

Interstage pressure gauges (locally mounted)

Air storage and Containment Fill Stations allow for customization to meet specific requirements

DIMENSIONS L × W × H inches (mm)

VERTICAL 43 × 83 × 72 (1092 × 2108 × 1830)

HORIZONTAL 114 × 82 × 66 (2896 × 2083 × 1676)

WEIGHT pounds (kg)

VERTICAL 1200 – 2800 (544 – 1270)

HORIZONTAL 1200 – 5000 (544 – 2268)

1) Based on recharging an 80 cubic foot tank from 500 to 3000 psig.
2) Compressor capacity referenced to standard inlet conditions.
3) SECURUS electronic moisture monitoring is not standard.

E3 = Three Phase Electric, 230/460 VAC/60 Hz.
Other voltages available on request.

KV / HV = VERTICAL
K / H = HORIZONTAL

Dimensions and weight are approximate and are subject to change.